Chill Tub Lite — Integrated Ice Bath & Chiller

£3,495.00

Controlled Cold. No Ice. Less Friction.

The Chill Tub Lite brings precise, repeatable cold exposure into a streamlined system designed for everyday use.

Its integrated chiller allows the water temperature to be set as low as 3°C, removing the need to purchase, store and continually replace bags of ice.

A built-in ozone and filtration system circulates the water between sessions, while the included insulated cover helps protect the water from debris and reduces unwanted heat gain.

With a 400-litre capacity and clean rotomoulded construction, the Lite offers a practical route into temperature-controlled cold immersion for home gyms, recovery spaces, gardens and indoor wellness rooms.

Fill it. Set the temperature. Build the routine.


Precise Temperature Control

Traditional ice baths are difficult to keep consistent.

The Chill Tub Lite gives you direct control over the water-temperature setting, allowing each session to be repeated under more predictable conditions.

Key advantages include:

  • Temperature settings as low as 3°C
  • No bags of ice required
  • Integrated cooling system
  • Automatic temperature management
  • Consistent conditions between sessions
  • Suitable for gradual cold-acclimation routines

The current official Chill Tubs specification lists a full set-point range from 3°C to 40°C. Confirm the exact functionality of the supplied unit before promoting warm-water use.

Actual cooling time depends on starting water temperature, ambient conditions, ventilation, cover use and the selected temperature. Chill Tubs advises allowing approximately 6–12 hours for the system to reach the chosen setting, depending on environmental conditions.


Integrated Ozone and Filtration

The Chill Tub Lite is designed as a self-contained water-care system.

Its built-in ozone and filter arrangement circulates the water to support clarity and remove debris between sessions.

This means:

  • No separate external chiller is required
  • No exposed hoses need to be added to the basic setup
  • Water is filtered continuously while the system operates
  • Routine care is simpler than a manually filled ice bath
  • The unit remains ready for more consistent use

The system still requires routine water testing, approved sanitisation, filter cleaning and periodic water changes.

Cold water slows bacterial growth but does not remove the need for proper water care.


Lighter, Durable Construction

The Lite uses a rotomoulded shell that is designed to be lighter than the stainless-steel Chill Tubs Original while retaining a substantial 400-litre bathing capacity.

At approximately 85kg dry, it is easier to position during the initial installation than heavier integrated cold-plunge systems.

Once filled, the complete unit can weigh approximately 485kg before the user enters, so it must always sit on a suitable level and load-bearing surface.

Its clean, understated form works well within:

  • Private gardens
  • Home gyms
  • Recovery rooms
  • Sauna and contrast-therapy spaces
  • Covered terraces
  • Personal-training studios
  • Boutique wellness environments

Indoor installation is possible where the floor loading, ventilation, drainage and surrounding moisture management have been properly considered.


Insulated Cover Included

A fitted insulated cover is included with every Chill Tub Lite.

The cover helps:

  • Reduce heat gain from warm outdoor air and direct sunlight
  • Keep leaves and debris out of the water
  • Protect the adjacent service area
  • Reduce unnecessary chiller operation
  • Deter unsupervised access by children or animals

The cover should be secured whenever the Chill Tub is not in use.

It should be handled carefully and cleaned regularly in accordance with the manufacturer’s guidance.


This Specification Includes

The core Chill Tub Lite package includes:

  • Rotomoulded cold-plunge body
  • Integrated temperature-control system
  • Integrated chiller
  • Built-in circulation pump
  • Ozone purification system
  • Internal filtration
  • Digital temperature control
  • Hose-compatible drain connection
  • Antifreeze protection function
  • Insulated fitted cover
  • Standard 13A power connection
  • Manufacturer warranty

No external chiller, bags of ice or separate filtration package are required for normal operation.


Build Your Recovery Setup

The Chill Tub Lite is a complete product, so the configurator should remain simpler than a sauna configurator.

The most useful options are those that make delivery, setup and ownership easier.

1. Choose Your Delivery Route

Select standard pallet delivery or a KeiCo placement and commissioning service where available.

2. Add Water Care

Choose a starter or annual water-care pack containing approved sanitiser, test strips and replacement filters.

3. Add Recovery Essentials

Complete the setup with suitable towels, robes and an anti-slip floor mat where available.

4. Build Contrast Therapy

Pair the Chill Tub Lite with a KeiCo Ready sauna to create a connected heat-and-cold recovery environment.


Designed for Consistent Use

Cold-water immersion is most useful when it can be approached consistently and progressively.

The Chill Tub Lite is commonly selected for:

  • Post-training routines
  • Heat-and-cold contrast therapy
  • Morning alertness rituals
  • Structured cold acclimation
  • Home recovery spaces
  • Sauna cooldown sessions
  • Personal wellness routines

Cold exposure is not suitable for everyone.

Tolerance varies significantly, and colder does not automatically mean better. Beginners should start with warmer water and short sessions, then progress gradually.

Anyone who is pregnant, under medical care, or living with cardiovascular, blood-pressure, diabetes, mobility or other relevant health concerns should seek medical guidance before use. Never use the Chill Tub after alcohol or recreational drugs.


From Cold Plunge to Complete KeiCo Wellness Space

The Chill Tub Lite can be used as a standalone recovery product or integrated into a wider KeiCo project.

Depending on the agreed scope, our team can assist with:

  • Product positioning
  • Delivery-access review
  • Base and floor assessment
  • Electrical-location planning
  • Placement and commissioning
  • Sauna and cold-plunge layouts
  • Outdoor shower integration
  • Water-care guidance
  • Replacement filters and consumables
  • Ongoing ownership support

For a complete contrast-therapy environment, pair controlled cold with a KeiCo sauna:

Heat → Cold → Breathe → Recover

Controlled Cold. No Ice. Less Friction.

The Chill Tub Lite brings precise, repeatable cold exposure into a streamlined system designed for everyday use.

Its integrated chiller allows the water temperature to be set as low as 3°C, removing the need to purchase, store and continually replace bags of ice.

A built-in ozone and filtration system circulates the water between sessions, while the included insulated cover helps protect the water from debris and reduces unwanted heat gain.

With a 400-litre capacity and clean rotomoulded construction, the Lite offers a practical route into temperature-controlled cold immersion for home gyms, recovery spaces, gardens and indoor wellness rooms.

Fill it. Set the temperature. Build the routine.


Precise Temperature Control

Traditional ice baths are difficult to keep consistent.

The Chill Tub Lite gives you direct control over the water-temperature setting, allowing each session to be repeated under more predictable conditions.

Key advantages include:

  • Temperature settings as low as 3°C
  • No bags of ice required
  • Integrated cooling system
  • Automatic temperature management
  • Consistent conditions between sessions
  • Suitable for gradual cold-acclimation routines

The current official Chill Tubs specification lists a full set-point range from 3°C to 40°C. Confirm the exact functionality of the supplied unit before promoting warm-water use.

Actual cooling time depends on starting water temperature, ambient conditions, ventilation, cover use and the selected temperature. Chill Tubs advises allowing approximately 6–12 hours for the system to reach the chosen setting, depending on environmental conditions.


Integrated Ozone and Filtration

The Chill Tub Lite is designed as a self-contained water-care system.

Its built-in ozone and filter arrangement circulates the water to support clarity and remove debris between sessions.

This means:

  • No separate external chiller is required
  • No exposed hoses need to be added to the basic setup
  • Water is filtered continuously while the system operates
  • Routine care is simpler than a manually filled ice bath
  • The unit remains ready for more consistent use

The system still requires routine water testing, approved sanitisation, filter cleaning and periodic water changes.

Cold water slows bacterial growth but does not remove the need for proper water care.


Lighter, Durable Construction

The Lite uses a rotomoulded shell that is designed to be lighter than the stainless-steel Chill Tubs Original while retaining a substantial 400-litre bathing capacity.

At approximately 85kg dry, it is easier to position during the initial installation than heavier integrated cold-plunge systems.

Once filled, the complete unit can weigh approximately 485kg before the user enters, so it must always sit on a suitable level and load-bearing surface.

Its clean, understated form works well within:

  • Private gardens
  • Home gyms
  • Recovery rooms
  • Sauna and contrast-therapy spaces
  • Covered terraces
  • Personal-training studios
  • Boutique wellness environments

Indoor installation is possible where the floor loading, ventilation, drainage and surrounding moisture management have been properly considered.


Insulated Cover Included

A fitted insulated cover is included with every Chill Tub Lite.

The cover helps:

  • Reduce heat gain from warm outdoor air and direct sunlight
  • Keep leaves and debris out of the water
  • Protect the adjacent service area
  • Reduce unnecessary chiller operation
  • Deter unsupervised access by children or animals

The cover should be secured whenever the Chill Tub is not in use.

It should be handled carefully and cleaned regularly in accordance with the manufacturer’s guidance.


This Specification Includes

The core Chill Tub Lite package includes:

  • Rotomoulded cold-plunge body
  • Integrated temperature-control system
  • Integrated chiller
  • Built-in circulation pump
  • Ozone purification system
  • Internal filtration
  • Digital temperature control
  • Hose-compatible drain connection
  • Antifreeze protection function
  • Insulated fitted cover
  • Standard 13A power connection
  • Manufacturer warranty

No external chiller, bags of ice or separate filtration package are required for normal operation.


Build Your Recovery Setup

The Chill Tub Lite is a complete product, so the configurator should remain simpler than a sauna configurator.

The most useful options are those that make delivery, setup and ownership easier.

1. Choose Your Delivery Route

Select standard pallet delivery or a KeiCo placement and commissioning service where available.

2. Add Water Care

Choose a starter or annual water-care pack containing approved sanitiser, test strips and replacement filters.

3. Add Recovery Essentials

Complete the setup with suitable towels, robes and an anti-slip floor mat where available.

4. Build Contrast Therapy

Pair the Chill Tub Lite with a KeiCo Ready sauna to create a connected heat-and-cold recovery environment.


Designed for Consistent Use

Cold-water immersion is most useful when it can be approached consistently and progressively.

The Chill Tub Lite is commonly selected for:

  • Post-training routines
  • Heat-and-cold contrast therapy
  • Morning alertness rituals
  • Structured cold acclimation
  • Home recovery spaces
  • Sauna cooldown sessions
  • Personal wellness routines

Cold exposure is not suitable for everyone.

Tolerance varies significantly, and colder does not automatically mean better. Beginners should start with warmer water and short sessions, then progress gradually.

Anyone who is pregnant, under medical care, or living with cardiovascular, blood-pressure, diabetes, mobility or other relevant health concerns should seek medical guidance before use. Never use the Chill Tub after alcohol or recreational drugs.


From Cold Plunge to Complete KeiCo Wellness Space

The Chill Tub Lite can be used as a standalone recovery product or integrated into a wider KeiCo project.

Depending on the agreed scope, our team can assist with:

  • Product positioning
  • Delivery-access review
  • Base and floor assessment
  • Electrical-location planning
  • Placement and commissioning
  • Sauna and cold-plunge layouts
  • Outdoor shower integration
  • Water-care guidance
  • Replacement filters and consumables
  • Ongoing ownership support

For a complete contrast-therapy environment, pair controlled cold with a KeiCo sauna:

Heat → Cold → Breathe → Recover




📧 Queries & Details: For further details or to discus your order, kindly reach out to orders@thekeico.com where one of our team will be ready to help!

Dimensions & Technical Specification:

Overall dimensions: 1,790mm (L) × 750mm (W) × 755mm (H)

Bathing-area length: approximately 1,150mm
Water capacity: 400 litres
Dry weight: approximately 85kg
Filled weight: approximately 485kg before user entry
Material: rotomoulded construction
Temperature setting: as low as 3°C
Power supply: 13A, 220–240V, 50/60Hz
Purification: built-in ozone system
Filtration: integrated
Drainage: hose-pipe connection
Antifreeze function: included
Insulated cover: included
External chiller required: no

Delivery & Setup

The Chill Tub Lite is supplied as a self-contained cold-plunge system with its integrated chiller, filtration and insulated cover.

Standard delivery is normally completed by pallet or specialist courier to the nearest suitable kerbside unloading point unless an enhanced service has been selected.

Before ordering, confirm:
Suitable delivery access
A level and load-bearing base
An RCD-protected 13A socket
No requirement for an extension lead
Adequate ventilation around the services area
A suitable filling and drainage route
Clear access for future filter maintenance

Once positioned:
Ensure the power is switched off
Fill using a garden hose
Bleed trapped air from the filter and pump housing
Switch the system on only once filled
Set the desired temperature
Allow sufficient time for the system to reach the target

FAQ's

Does the Chill Tub Lite need ice?

No. The integrated chiller can cool and maintain the water at settings as low as 3°C. Cooling time depends on starting temperature, ambient conditions, ventilation, cover use and the selected setting.

How does the water stay clean?

Integrated circulation, filtration and ozone support water clarity between sessions. You must still test the water, use approved sanitiser, clean the filter and change the water in line with current manufacturer guidance.

What electrical supply is required?

A direct RCD-protected 13A, 220–240V socket. Do not use an extension lead. Outdoor installations may require a suitably positioned waterproof socket and must follow current electrical regulations.

Can it be installed indoors or outdoors?

Yes, where there is a flat load-bearing base, adequate chiller ventilation and a planned filling and drainage route. Indoor spaces also need waterproof surroundings and moisture management. Confirm the final filled load before installation.

How long should a cold-plunge session last?

There is no universal duration. Begin with warmer water and short exposure, progress gradually and stop if you feel unwell. Seek medical advice before use if pregnant, under medical care or living with a relevant health condition.